How much does driving range netting cost?
There is no reliable “per-foot” price for a turnkey driving range netting system. A full project with steel poles commonly ranges from $100,000 to $500,000+, and larger or more complex facilities can exceed a million dollars.
That range is wide because the variables are real: height, soil, wind exposure, access, materials, and engineering requirements all materially change scope and cost.
Why there is no standard per-foot price
A 150-foot run at 30 feet high on flat ground is not the same project as a 150-foot run at 80 feet on a hillside with rock. Same linear footage — dramatically different foundations, poles, engineering, and equipment.
What drives the cost of driving range netting
Netting height is the single biggest driver of material and engineering complexity. Most driving ranges use 45–65 feet at the tee area, but ranges near roads or residential areas may require 100+ feet.
- Netting height (the biggest cost driver for materials)
- Linear footage (total run length)
- Labor and crew size (timeline + height increase complexity)
- Equipment requirements (cranes, diggers, man-lifts)
- Soil conditions (rock, sand, water table, clay)
- Geographic location (labor rates, mobilization, local fees)
- Wind speed requirements (coastal / high-wind zones)
- Engineering and permitting requirements (often 30'+ systems)
- Pole type (wood vs. steel)
- Material grade (economy vs. pro vs. premium)
Pole spacing and type: wood vs. steel
50 feet on-center is a common pole spacing standard. Wood poles are typically suitable up to ~70 feet. Above that, steel poles become structurally necessary and often more cost-effective.
Netting material grades and expected lifespan
Driving ranges typically use 3/4" to 1" mesh to prevent ball pass-through. Material grade affects replacement cycles, downtime, and long-term ROI.
Economy (Polyester)
Expected lifespan: 5–7 years
Best for: Budget installations, short-term use
Pro (Polyester)
Expected lifespan: 7–10 years
Best for: Standard commercial driving ranges
Premium (Nylon)
Expected lifespan: 10–14 years
Best for: High-end facilities, long-term ROI
What’s included in a turnkey quote
- Site assessment and measurement
- Stamped engineering drawings (when required)
- Pole procurement and setting (wood or steel, with foundations)
- Cable and hardware installation
- Netting material installation and tensioning
- Final inspection and project handoff
- 5-year full coverage warranty
Note: Permitting is typically handled by the property owner or general contractor. Gorilla Netting provides the documentation needed to support permit applications.
FAQ
How much does it cost to net a driving range?
Full turnkey projects with steel poles typically range from $100,000 to $500,000+, and larger or more complex ranges can exceed a million dollars. Price depends on height, linear footage, pole type, soil conditions, wind requirements, and material grade.
How tall should driving range netting be?
Most driving ranges use 45–65 feet at the tee area. Sites near roads, residential areas, or elevated tees may require 80–125+ feet. Height is the single biggest material cost driver.
Can I get a quote without a site visit?
Yes — experienced contractors can estimate accurately using maps, site plans, and soil records. A formal on-site verification should still occur before project start to confirm conditions.